Wuxi IDEAL Machinery Manufacturing Co., Ltd. will introduce to you how the blasting effect of Wuxi shot blasting machine is affected?

Which aspects will affect the shot blasting effect of Wuxi shot blasting machine

Are you facing such problems about the shot blasting effect of the shot blasting machine? The hardness is not high enough, the impurity is eradicated, the steel shot wears fast and so on. So what are the effects of shot blasting?

1. Hardness of steel shot and steel sand: when the hardness of steel shot and steel sand is higher than the hardness of parts, the change of its hardness value will not affect the shot blasting strength. If the workpiece is too soft at this time, be careful to be damaged, properly adjust the power of the shot blaster to reduce the shot blasting strength; When the steel shot and sand are softer than the parts, if the shot blasting hardness value decreases, the shot blasting strength also decreases. If the desired effect is not achieved, the power of the shot blasting machine can be appropriately increased to add the shot blasting strength.

2. Shot blasting rate: when the shot blasting rate increases, the shot blasting strength will also increase, but when the rate is too high, the damage amount of steel shot and sand will also increase.

3. Thickness of steel shot and sand: the larger the volume of steel shot and sand, the greater the kinetic energy of impact, and the greater the shot blasting strength. Therefore, while ensuring the strength of shot blasting, we should only use smaller steel shot and sand, so that the overall power will increase relatively. The shot blasting standard is also constrained by the part shape. When there is a groove on the part, the diameter of steel shot and sand should be less than half of the inner radius of the groove.

4. Angle of shot: when the steel shot and sand jet are perpendicular to the workpiece to be shot, the steel shot and sand strength is high, and should be kept in this state for shot blasting. If it is required to use small angle shot blasting due to the condition of parts, the standard and rate of steel shot and sand shall be appropriately increased.

As long as the hardness of steel shot and sand is within a reasonable range, the impact function is good. If the hardness of steel shot and sand is too high, its brittleness is large and it is easy to break; If the hardness of steel shot and sand is too low, the impact effect is poor, and the shot blasting time and other costs are added in disguised form. Therefore, steel shot and sand can really save production costs within the proper hardness range.

The above is the full content of Wuxi IDEAL Machinery Manufacturing Co., Ltd. to introduce to you the impact of the blasting effect of Wuxi shot blasting machine. If you have any questions, please feel free to consult.