Today, Wuxi IDEAL Machinery Manufacturing Co., Ltd. will introduce Wuxi shot blasting machine. The shot blasting machine is different from the shot blasting machine in that it is used to reduce the fatigue life of the parts, add different external stresses, add the strength of the parts, or prevent fretting. The shot blasting machine was earlier used to remove sand and oxide scale from castings and forgings. It mainly uses the high-speed rotating impeller to throw the shot sand into the surface of the parts at high speed to meet the requirements of surface treatment. The shot sand speed is generally 50~100nds.

With the official introduction of the new international ballast tank coating specification, the requirements and specifications for ship plate coating are clearly included in the classification conditions. There are higher requirements for the anti-corrosion performance and service life of the ship plate coating to ensure the safety of the hull structure.

Wuxi shot blasting machine should not be too careless in planning, no matter what conditions it pays attention to, otherwise it will constitute a very serious result. Operation time: this is also related to the number of shot peening machines or shot peening disposal. The amount of explosion will directly affect the size of the air and the size of the project investment. Therefore, sometimes some companies or enterprises want to reduce the cost of some air presses.

Generally, the daily working hours will be added, and the operation and output value of the equipment operated by the latter must be advanced. Some cleaned parts must be coated internally in a short time. Prerequisite 2 for shot blasting machine planning, appearance of part appearance: the beginning of part appearance also determines the difficulty of shot blasting machine in finishing time. It is difficult to cover up some very severe covering and corrosion on the outside, and it is very simple to clean up some slight corrosion on the outside.

The demand for finishing of Wuxi shot blasting machine: the manufacturer has a high demand for finishing, with the intention to minimize some damage. Discontinuous classification under different consumption conditions. The shot blasting machine actively completes the intended cleaning task, which not only reduces the labor intensity of manual cleaning, but also improves the cleaning effect and greatly improves the work efficiency. Together, because the mechanical equipment is made of steel, the planning is reasonable. Even if the equipment is in working condition for a long time, it will not constitute a serious defect and will have a long service life.

It is an essential cleaning equipment for the iron and steel casting profession. When using iron shot, the hardness of the shot blasting machine is high, and it is simply broken into polygons, forming sharp corners. The movement on the blade is mainly sliding, so the cutting effect is severe and grinding is severe. There are severe scratches on the surface. When the wear surface of the sample at the entrance end is investigated under a low magnification scanning electron microscope, it can be seen that a large number of pits are filled in the wear surface due to the impact of the projectile.

The above is the relevant content introduced to us by Wuxi IDEAL Machinery Manufacturing Co., Ltd.