Today, Wuxi IDEAL Machinery will introduce Wuxi shot blasting machine. Cleaning power is an important specification for measuring the working condition of shot blasting machine. The cleaning power of shot blasting machine is related to many factors, and each factor will determine its cleaning power. Assuming that you want to make the shot blasting machine have higher cleaning power, you need to understand the factors that affect its cleaning power. How to improve the cleaning power of Wuxi shot blasting machine?

During the operation of Wuxi shot blasting machine, the lack of experienced operators will greatly reduce the blasting effect of the shot blasting machine and then affect the clearing function of the shot blasting machine. The shot power of the shot blasting machine directly affects the performance of all the operations of the shot blasting machine. The editor briefly introduces several methods to make the shot blasting effect of the shot blasting machine reach a good working condition, and then advances the clearing power of the shot blasting machine.

Increase the supply of projectiles. Adjust the orientation of the orientation sleeve. The rolling directional sleeve can adjust the direction of the shot material jet within the range of shooting, but too much left or right deviation of the jet will weaken the shooting power and accelerate the wear of the radial guard.

Place a lightly rusted or coated steel plate in the shot blasting area of the shot blaster; Start the shot blaster. The motor accelerates to the proper speed; Use the control valve (manual) to open the shot blasting gate. After about 5 seconds, the shot material is sent to the impeller, and the metal rust on the slightly rusted steel plate is removed; The projection direction is determined. Use a 19MM adjustable wrench to loosen the three hexagon bolts on the pressure plate until the orientation sleeve can be rolled by hand, and then tighten the orientation sleeve.

We all know that the derusting function of the shot blasting machine is inseparable from the strength of the steel shot, and the strength of the shot blasting is also strong and weak. To achieve a good derusting effect, we must master the strength of the shot blasting. So, what factors affect the shot strength of Wuxi shot blasting machine? Let's talk about it with Xiao Bian.

First of all, the speed of shot blasting, but we should also be clear that if the speed of shot blasting increases and the strength of shot blasting increases, the damage rate of shot blasting will also advance, and the relationship between them is proportional. The second is the size of shot blasting. The impact force of large shot blasting is large, and the strength is naturally increased. However, on the premise of ensuring the strength of shot blasting, we usually choose the appropriate smaller steel shot, because if the steel shot is too large, the coverage rate will drop.

Secondly, the hardness and crushing amount of shot blasting will also affect the shot strength of the crawler shot blasting machine. Assuming that the hardness of shot blasting is greater than the hardness of parts, it will not have much impact if the hardness of shot blasting is not changed. Assuming that the hardness of shot blasting is less than the hardness of parts, the strength of shot blasting will decrease with the decrease of its hardness value. In addition, when the shot blasting machine is damaged, the shot blasting strength will be reduced, and the broken steel shot will be damaged to the surface of the machine parts if it is not cleaned up in time.

After that, we will introduce the influence of the radiation viewpoint on the shot intensity. When the shot blasting jet and the surface to be sprayed keep straight, the shot blasting intensity is higher. Therefore, we propose to assume that under such conditions, shot blasting can be stopped discontinuously, that is, a good operation effect can be achieved.

The above is the relevant content introduced by Wuxi IDEAL Machinery Manufacturing Co., Ltd.