Today, Wuxi IDEAL Machinery Manufacturing Co., Ltd. will introduce Wuxi shot blasting machine. Nowadays, the shot blasting machine is widely used in production, and more and more centers are beginning to use this machine. However, because the time when it came out is not too long, many people do not know how to stop using this machine, and what problems the operator needs to pay attention to in the process of using it. Here is how to use Wuxi shot blasting machine correctly to ensure that the machine can work normally.

The shot blasting machine is a processing technology that uses the shot blasting machine to drop the steel sand and steel shot at high speed and impact the surface of the data object. Compared with other surface treatment technologies, it is faster and more useful, and can be used for the casting process after partial retention or stamping.

Wuxi shot blasting machine can also be used to remove burrs, barriers and rust, which may affect the integrity, appearance, or definition of object parts. The shot blasting machine can also remove contaminants from the surface of a part of the coating, and provide a summary of the surface to increase the adhesion of the coating, so as to strengthen the workpiece.

For the operators who use Wuxi shot blasting machine, before operating the machine, they must prepare all the protective equipment, so as to prevent the iron shot from hitting the body and causing personal damage. After they are ready, they can go to prepare to open the machine. To open the machine, first turn on the fan, then turn on the bucket elevator, followed by the spiral screen, and then the six numbers that are thoughtless.

Then turn on the assistant, then the gate of the iron shot, and then turn on the suspension chain. After all the buttons on the panel are turned on, the machine can work normally. If you want to close the machine, then the order of opening the machine is exactly the opposite. You should first close the suspension chain, and then close the fan. According to this order, you can prevent the machine from defects due to improper operation.

After the shot blasting machine is turned on, first click the button of test run to let the machine operate without hanging the casting for three to five minutes, and then hang the casting with 30 hooks on the suspension chain after admitting that the machine operates normally, and then stop cleaning the machine while hanging the casting, so that the machine can operate normally. Grasping the correct operation method of the shot blasting machine can enable the operator to stop the operation in a standardized manner and reduce the occurrence of accidents during the operation of the machine.

This is all of today's content. If you want to know more about Wuxi shot blasting machine, please pay attention to Wuxi IDEAL Machinery.