Today, Wuxi IDEAL Machinery will introduce Wuxi shot blasting machine. The advantages of the dust remover supporting the shot blasting machine: the dust removal power is high, generally more than 99%, the dust concentration at the outlet of the dust remover is within tens of mg/m3, and the fine dust with sub-micron particle size has a high classification power. The range of disposal air volume is wide, ranging from only a few m3 per minute to tens of thousands of m3 per minute, which can be used for dust removal of industrial furnace flue gas and reduce the emission of atmospheric pollutants.

Simple structure, easy maintenance and operation. On the premise of ensuring the same high dust removal power, the cost is lower than that of electric precipitator. When glass fiber, polytetrafluoroethylene, P84 and other high-temperature resistant filter materials are selected, they can work at high temperatures above 200 ℃, and are insensitive to the characteristics of dust and are not affected by dust and resistance.

Wuxi shot blasting machine dust remover, shot blasting machine supporting dust remover product maintenance: always check the action of control valve, pulse valve and timer. The failure of rubber diaphragm of pulse valve is a common defect of bag filter, which directly affects the cleaning effect. The equipment belongs to the external filter type, and the bag is filled with skeleton. It is necessary to check whether the parts fixing the filter bag are loose and whether the tension of the filter bag is appropriate.

Whether the supporting structure can be lubricated to avoid wearing the filter bag. Compressed air is selected for ash removal. Therefore, it is required to remove oil mist and water droplets, and the oil-water separator should be cleaned frequently to prevent the failure of the moving mechanism and the blockage of the filter bag. Whether the disposal air volume and pressure and temperature at each test point are consistent with the plan. The condition of the filter bag device can be determined by visual inspection of the discharge of the chimney after the operation, whether the bag is dropped, loosened, worn, etc.

In the production process of large quantities of steel sand and steel shot, the quality of steel sand and steel shot in batches cannot be guaranteed, so a shot blasting machine is produced. The steel sand and steel shot are dropped at high speed by the shot blasting machine. In the process of dropping, the stains attached to the steel sand and steel shot surface are cleaned, so that the damage to the steel sand and steel shot surface can be found in large quantities.

In fact, the shot blasting machine is a kind of surface treatment skill. The first thing is to deal with the appearance of steel products in large quantities during the production of steel. The use of the shot blasting machine can effectively remove the burrs and some large-scale rust on the surface of steel products. When using the Wuxi shot blasting machine, if the skills are not well mastered, it is likely to form the integrity of the surface of steel products. The light ones will form the scratch on the surface, while the severe ones will form the severe bad appearance, which will affect the product image.

For the production of steel, the shot blasting machine is an inevitable equipment, and the use of Wuxi shot blasting machine for the surface treatment of steel sand and steel shot is also an essential process. It is a necessary procedure to remove the stain and rust on the surface of steel sand and steel shot and to check the integrity of the product surface.

If you want to know more, you can read our website, and we will provide you with better information!