Wuxi shot blasting machine manufacturer will talk with you about how the shot blasting machine works and what is its composition?

The following is introduced to you by Wuxi shot blasting machine manufacturer:

How the shot blasting machine works:

Shot blasting machine is applicable to many industries, such as casting, textile, rubber, etc. This kind of equipment relies on the high-speed rotation of the polishing head to vigorously throw abrasive particles onto the surface of the workpiece to achieve the purpose of work. The polishing head of this equipment is equipped with blades inside.

When the machine is working, the abrasive enters the center of the polishing head through the feed inlet of the equipment. There is a shot dividing wheel rotating with the polishing head in the center of the polishing head, and the directional sleeve is outside the shot dividing wheel. The abrasive is sent to the end of the blade polishing head through the directional opening of the equipment. Under the action of centrifugal force, abrasive particles will accelerate along the length direction of the blade of the equipment, until the abrasive particles reach the top of the blade, and then impact the surface of the workpiece at a higher speed.

The shot blasting machine enters the abrasive onto the blade as required, which is the function of the shot splitting wheel. Once the opening of the shot splitting wheel is seriously worn, if the abrasive hits the end of the blade, the blade will be worn, and the abrasive will disperse irregularly. Therefore, when using this kind of equipment, it is necessary to operate in strict accordance with the requirements of the equipment's operating instructions. It is necessary to regularly check the wear of the shot splitting wheel. The severely worn shot splitting wheel needs to be replaced in time.

When using the shot blasting machine for work, determine the position where the abrasive is fed to the blade by the shot splitting wheel, which is the position of the opening of the directional sleeve of the shot blasting equipment. The opening shape of the directional sleeve of this kind of equipment will seriously affect the size of the abrasive hot zone and also affect the divergent shape.

The hot area of shot blasting equipment is the abrasive concentration area on the abrasive divergence surface. The distribution of abrasive on the blade is very uneven, resulting in the hot area. If this happens when using the shot blasting equipment, the positioning of the directional sleeve should be adjusted, and the user should make adjustments according to the wear of the equipment opening, so as to ensure that the shot blasting equipment is in good working condition.

Composition of shot blasting machine:

① The shot blaster usually uses the high-speed fan impeller to break the shot wheel and store the propellant in a certain direction under the action of high cohesion. In the whole process of work, some shot blasters can shake or move left and right at a certain angle.

② Bullet wheel break collection, extraction and transportation equipment.

③ It is the bearing medium for continuous operation and rotation of castings in the whole process of shot blasting and rust removal.

④ Dust collector equipment.

If you want to know more relevant knowledge, you can browse our website, and we will provide you with more professional information!