Through shot blasting machine_ Shot blasting machine manufacturer_ Wuxi shot blasting machine-Wuxi IDEAL Machinery Manufacturing Co., Ltd

Through shot blasting machine_ Shot blasting machine manufacturer_ Wuxi shot blasting machine-Wuxi IDEAL Machinery Manufacturing Co., Ltd

current position: Home > News Center > Industry

What is the daily protection and normal operation mode of Wuxi shot blasting machine

2022-08-22 14:04:17
times

Wuxi IDEAL Machinery Manufacturing Co., Ltd. told you about the daily protection and normal operation of Wuxi shot blasting machine.

Daily protection of Wuxi shot blasting machine accessories

When people use the walk-through shot blasting machine, it is assumed that they do not often check the application of the parts of the shot blasting machine, which leads to excessive wear of the parts, constitutes mechanical failure, and brings great loss to the enterprise. This requires that the shot blasting machine should have necessary daily protection. However, how to protect it has become a problem that troubles everyone. After all, the shot blasting machine has many vulnerable parts and thin parts, The manufacturer of the walk-through shot blasting machine has sorted out some daily protection techniques for you to extend the service life of the shot blasting machine and share with you:


无锡抛丸机

Daily protection of shot blasting machine accessories:

1. Check whether there are sundries entering the machine, and timely remove them to prevent blocking each conveying link from causing equipment failure.

2. The manufacturer of the walk-through shot blasting machine shall check whether the screws of the accessories of the shot blasting machine are tightened before operation.

3. Before operation, each shift shall check the wearing condition of vulnerable parts such as guard plate, blade, impeller, rubber curtain, directional sleeve, roller, etc. twice, and replace them in time.

4. Check the cooperation of all electrical moving parts, and check whether the bolt connection is loose, and tighten it in time.

5. The oiling point of the shot blasting machine equipment shall be punctual to check whether the oiling of the part meets the requirements.

Generally speaking, the vulnerable parts and wear-resistant parts of Wuxi shot blasting machine are made of high chromium wear-resistant cast iron. As far as the service life is concerned, the service life of blades exceeds 500 hours, the service life of side plates and top plates is at least 800 hours, the service life of end plates is 1200 hours, and the service life of directional sleeve shot splitter is 1800 hours. The protective plate in the main engine room has no problem within one year. Some shot blasting equipment is still in excellent condition even if it has been used for more than 2 years, and some parts of shot blasting machine are severely worn after 3 or 4 months.

How to use this machine correctly to ensure its normal operation.

For the operators who use the shot blasting machine, before operating the machine, they must prepare all the protective equipment, so as to prevent the iron shot from hitting the body and causing personal injury. After they are ready, they can prepare to turn the machine over. To turn the machine over, first turn on the fan, then turn on the bucket elevator, then turn on the spiral screen, then turn on the six figures, and then turn on the assistant, Then there is the gate of the iron shot, and after all, it is to open the suspension chain.

After all the buttons on the panel are turned on, the machine can work normally. If you want to close the machine, the order of opening the machine is exactly the opposite. You should first support the suspension chain, and then close the fan. In this order, you can prevent the machine from defects due to improper operation.

After the shot blasting machine is turned on, first click the button of test run to let the machine operate without hanging the casting for three to five minutes. After confirming that the machine is operating normally, hang the casting with 30 hooks on the suspension chain, and then clean the machine while hanging the casting, so that the machine can operate normally. Mastering the correct operation method of the shot blasting machine will enable the operators to operate in a standardized manner and reduce the occurrence of safety accidents during the operation of the machine.


无锡抛丸机

If you want to know more about relevant knowledge, you can browse our website, and we will provide you with more professional information!


Recently Viewed:

Related products

Related news