Wuxi IDEAL Machinery Manufacturing Co., Ltd talk about complementarity between Wuxi shot blasting machine and sand blasting machine today.
Compared with the advantages and disadvantages of Wuxi shot blasting machine, the cleaning equipment of Wuxi shot blasting machine is used to eliminate the oxide and adhesive on the surface of the workpiece and make the workpiece reach a certain surface quality requirement. It is mainly divided into dry cleaning equipment and wet cleaning equipment. Dry cleaning equipment is widely used because it has certain mechanical cutting effect and impact effect of plastic deformation on the surface of the workpiece, so it can not only remove the adhesive and oxide on the surface of the workpiece, but also make the surface of the workpiece meet certain surface quality requirements, with less pollution and low cost.
Methods and characteristics of dry cleaning: dry cleaning is to clean the workpiece in a monotonous and non-liquid medium state, which is the primary method to remove rust, scale and residual molding sand on the surface of castings, forgings, steel structures, etc. According to the cleaning mechanism, it can be divided into abrasive cleaning and non-abrasive cleaning.
Non-abrasive cleaning is to clean up the surface of the workpiece by bumping and rubbing each other. In order to enhance the cleaning effect, some stars are often involved in the workpiece.
Abrasive cleaning is the use of high-speed flying projectiles to impact and cut the surface of the workpiece to achieve the purpose of cleaning. This method can be used for all kinds of raw materials, components and standard workpieces. Tremella is now the primary method for dry cleaning.
The benefits of blast cleaning by sandblasting machine are as follows:
1. Be able to use metal or non-metal projectiles at will to clean up the different requirements of the workpiece appearance
2. It has great flexibility in cleaning. It can simply clean up the inner and outer surfaces of messy workpieces and the inner walls of pipe fittings without being bound by the place. It can be moved to the vicinity of oversized workpieces for cleaning
3. Simple equipment structure, low investment for the whole machine, less vulnerable parts and low repair costs
4. It needs to be equipped with a high-power air compressor station. Under the same conditions of cleaning up, the small size has large energy.
5. The cleaning power is low, there are many operators, and the labor intensity is high.
The cleaning features of Wuxi shot blasting machine are as follows:
1. High cleaning power, low cost, few operators, suitable for mass production
2. No compressed air is used to speed up the projectile, so there is no need to set a high-power air compression station, and the cleaned surface is also free of moisture
3. The flexibility is poor, and it is bound by the place. There is some blindness in cleaning up the workpiece, and it is easy to have a dead corner on the surface of the workpiece that cannot be cleaned up.
4. The equipment structure is disordered, there are many vulnerable parts, the parts wear quickly, the repair time is long, and the cost is high
5. Generally, it is not allowed to use light and fine shot steel, which will be strengthened after shot impact. It is feasible to increase the fatigue strength by about 50%, and its corrosion resistance stress will be nearly doubled;
The above is about the content sharing brought by the shot blasting machine manufacturer. Assuming that you have a demand for our company's products, please contact online customer service for detailed inquiry of quotations and other information, and also welcome you to our company for inquiry. We sincerely invite you to cooperate with us!