Shot blasting machine manufacturer of Wuxi IDEAL Machinery Manufacturing Co., Ltd introduce the grinding method of shot blasting machine to you today.

The manufacturer of the shot blasting machine introduces the grinding methods of the shot blasting machine to you, which are generally divided into the following types

Method 1. Vortex flow grinding method

In the form of polishing method, the water cyclotron is actually a cylindrical grinding tank installed on a horizontal plane, and some vertical planes in the water, grindstones, and polishing agents are placed. After mixing them, they can rotate according to the polishing stop slot. The pass-through shot blasting machine is easy to operate. It only needs to load the steel into the machine and press the start button. After a short processing process, the system will automatically unload the processed material. Almost all steel castings, malleable iron castings, gray castings, ductile iron castings, etc. shall be shot blasted. This is not only to clean the scale and sand on the surface of the casting, but also an indispensable preparatory process before the quality inspection of the casting. For example, the large gas turbine casing must be subject to strict shot blasting before NDT to ensure the reliability of the flaw detection results. Although the grindstone will have some rigid and fine abrasive layers due to centrifugal force. Then the part layer placed inside is polished, because the part will be polished and the relative movement speed difference will occur to produce more and more reasonable polishing effect.

Method II. Rotary mechanical grinding method

The rule requires a rotating abrasive composition and water, and as an abrasive, the polishing stone is placed in the groove. The mixture is then allowed to pivot the sandblasting machine according to the set route, so that the laminar flow part of the surface seems to improve the decorative effect of the optical components. The rotary grinding method is usually especially suitable for those small batches, multi-variety workpieces and small parts.

Method 3. Vibration grinding method

We need to put the things prepared in advance and the parts into the grinding groove first, and then we can analyze the vibration with the help of the power of water, so that we can use the vibration to make the parts and the grinding stone affect the relativistic movement.

Among all the grinding methods of the shot blasting machine, other grinding methods cannot achieve this effect except that the rotating form of the grinding machine requires a certain amount of clean space and can play all the role of solvent in the grinding groove. Suitable grinding method can be selected according to needs.

The above is about the content sharing brought by the shot blasting machine manufacturer. Assuming that you have a demand for our company's products, please contact online customer service for detailed inquiry of quotations and other information, and also welcome you to our company for inquiry. We sincerely invite you to cooperate with us!