Wuxi IDEAL Machinery Manufacturing Co., Ltd talk about what is the reason for the abnormal noise of the shot blasting machine and its application fields today.

The following is introduced to you by Wuxi shot blasting machine manufacturer:

1、 If the noise amplitude of the shot blasting machine is relatively large, the possible reason is

1. The blade is worn, and the condition is serious. The degree of wear is uneven. A better solution is to replace the blade

2. If the bearing is burnt out, the solution is to replace it. If the bearing is filled with grease again. The number of shots thrown by the shot blaster is uneven, which should be caused by the large gap between the knockout plates of the separator, so it should be properly adjusted. Another common fault is that the working efficiency of the dust collector is too low. The cause of the fault is generally that the wiring of the fan is overturned, and the wiring should be re-connected, and the sealing effect of the pipe connection is not good.

The major problem of the shot blasting machine is the poor cleaning effect of the casting. Generally, the number of shots is insufficient or the angle of the shot blasting machine is deflected, which has little to do with the parts of the shot blasting machine. The premise to ensure the normal operation of the shot blasting machine at one time is to ensure the use value of the parts of the shot blasting machine, and the relationship between the cleaning effect is not very big

2、 Application field of shot blasting machine

1. It can be used in the manufacturing of bearings. Generally speaking, the bearing surface is required to be smooth. Shot blasting can be used to remove burrs and impurities. Shot blasting machine is different from shot blasting machine in that it is used to reduce the fatigue life of parts, increase different surface stresses, increase the strength of parts, or prevent fretting.

2. It can be used in shipbuilding. Most of the steel plates used in shipbuilding are rusty, and the method of shot blasting can be used for rust removal.

3. It can be applied to the manufacturing of automobiles. Many steel plates and castings used in automobiles require polishing, but it is necessary to maintain the original shape and strength of the plates. The shot blasting method can be used to polish without physical damage. Shot blasting machine accessories can be used to remove burrs, diaphragms and rust, which may affect the integrity, appearance, or definition of the object part.

4. It can be applied to the manufacture of hardware products. Shot blasting can meet the requirements of flatness, smoothness and cleanness of hardware.

5. It can be applied to the field of electroplating. The requirements of electroplating are similar to those of hardware. Of course, it can also be used for processing.

6. It can be used in the field of motorcycle parts manufacturing, and usually uses roller-type equipment to complete the shot blasting operation.

The above is about the content sharing brought by the shot blasting machine manufacturer. Assuming that you have a demand for our company's products, please contact online customer service for specific information such as quotation, and also welcome you to our company for inquiry. We sincerely invite you to cooperate with us!