Wuxi IDEAL Machinery Manufacturing Co., Ltd., the manufacturer of shot blasting machine, will introduce to you what problems should be paid attention to during the maintenance of steel pipe shot blasting machine.

The manufacturer of the shot blasting machine will introduce to you what problems should be noticed during the maintenance of the steel pipe shot blasting machine.

The following points should be paid attention to during the maintenance of steel pipe shot blasting machine:

1. Check the foundation nuts of the steel pipe shot blasting machine chamber and tighten them in time if they are loose.

2. Check whether the elevator belt is too loose or deviated, and timely adjust and tighten it in case of any abnormality.

3. Check the wear condition of the blade of the shot blasting machine, the shot splitting wheel and the directional sleeve of the steel pipe shot blasting machine. When the blade thickness is evenly worn by 2/3, the window width of the shot splitting wheel is evenly worn by 1/2, and the window wear width of the directional sleeve is increased by 15mm, they should be replaced.

4. Check the screw conveyor and replace it when the blade diameter is worn by 20mm.

5. Check and sort out the sundries on the screen of the sand separator. If the screen is worn, it should be replaced immediately.

6. Work in strict accordance with operating procedures

7. Check and sort out the wear condition of the indoor guard board. If you see that the wear-resistant manganese rubber plate is worn or cracked, you should replace it in time.

8. Clean the bullets scattered around the equipment to prevent the operators from slipping and getting injured.

9. Regularly repair and overhaul the equipment and replace vulnerable parts.

The shot blasting machine is mainly composed of four parts, namely the shot blasting machine, the shot collection, separation and transportation system, the bearing body that makes the casting continuously run and turn over during the shot blasting process, and then the dust removal system. There are many kinds of shot blasting machines in the market. According to the structure of the shot blasting machine for the casting, it can not be divided into roller type, rotary table type, trolley type, wire type, etc., but by comparison, the wire blasting machine is still superior to other similar products, both in terms of the appearance of the equipment and in terms of the equipment's finishing effect and benefit rate.

The above is the full contents of the problems that should be paid attention to during the maintenance and repair of the steel pipe shot blasting machine introduced by Wuxi IDEAL Machinery Manufacturing Co., Ltd. If you have any problems, please feel free to consult.