Wuxi IDEAL Machinery Manufacturing Co., Ltd. will talk with you in detail about the impact of high temperature and humidity on Wuxi shot blasting machine

Under continuous high temperature and humidity environment, when Wuxi shot blasting machine is used, the reducer, motor, blade, etc. simply cause heat, and the gas itself has high temperature and heat. Shot blasting equipment is not easy to heat up. In this case, the cost of accessories of shot blasting equipment will be multiplied. Because it is in a rainy, cold and humid environment, the electrical equipment components of the shot blasting machine will age and have short circuit problems.

Therefore, in the environment of continuous high temperature and humidity, the shot blasting machine should be repaired, the parts that need to be replaced should be replaced immediately, and the oil should be added immediately. In addition, excellent raw materials should be used when selecting raw materials for shot blasting machine parts. For example, the maintenance equipment and blades of the shot blasting machine should be made of high chromium, the lubricating grease should be of high quality, and the rolling bearing should be used. At the same time, the production line of the shot blasting machine should be well ventilated and cooled. Only in that way can the service life of the shot blasting machine be more reasonable.

Use for cleaning the surface of shot blasting machine:

1. This is an essential preparation process before casting quality inspection while removing the scale and sand on the surface of the casting.

2. When silicon steel sheet, stainless steel sheet and other alloy steel plate and belt are produced, shot blasting or pickling treatment after annealing shall be carried out during cold rolling to ensure the surface roughness and thickness accuracy of cold rolled steel plate.

3. In the production of general castings, shot blasting cleaning is an essential process to find the defects of the surface of castings such as subcutaneous pores, slag holes, sand sticking, cold cells, leather, etc.

4. In the production of metallurgical steel, shot blasting or pickling is used to ensure the mechanical or chemical joint removal of phloem in the production of steel.

5. For non-ferrous metal castings such as aluminum alloy, copper alloy and other surface cleaning, in addition to removing the oxide scale and finding the surface defects of the castings, the burr of the die castings can also be removed by shot blasting to obtain the surface quality with decorative meaning and achieve comprehensive effect.

6. For example, the large gas turbine case shall be strictly cleaned by shot blasting before NDT to ensure the reliability of flaw detection results.

Workpiece strengthening function of shot blasting machine:

1. The important engineering method is to improve the strength and fatigue strength of parts by using shot blasting technology.

2. Some metals have more important meanings for workpieces requiring transformation hardening (such as martensite hardening) or further strengthening of transformation hardening.

3. According to the modern metal strength theory, improving the error density inside the metal is the main direction of improving the metal strength.

4. The aviation, aerospace industry, automobile, tractor and other parts require lightweight, but the reliability requirements are increasingly high.

5. Practice has proved that shot blasting with shot blasting machine is a process method to add metal potential structure.

If you want to know more about relevant knowledge, you can browse our website, and we will provide you with more professional information!