Wuxi IDEAL Machinery Manufacturing Co., Ltd. Wuxi shot blasting machine manufacturer will show you the characteristics of the shot blasting equipment?

First of all, it is applied to the removal of sand and oxide scale on the surface of casting steel and iron castings of Wuxi shot blasting machine. Almost all steel castings, gray castings, malleable iron castings, ductile iron castings, etc. shall be shot blasted. It is not only to remove the scale and sand sticking on the surface of the casting, but also an indispensable preparation process before the quality inspection of the casting. For example, it was necessary to carry out strict shot blasting for the NDT of the large gas turbine casing to ensure the reliability of the flaw detection results. In general casting production, shot blasting is an essential process to find the defects of casting surface, such as subcutaneous pores, slag holes, sand sticking, cold shuts, peeling, etc. In addition to removing the oxide scale and finding the appearance defects of the castings, the main purpose of the surface finishing of the non-ferrous metal castings, such as copper alloy, is to remove the burrs of the die castings and obtain the appearance quality with decorative significance by shot blasting. In the metallurgical steel production, shot blasting or acid cleaning is a process method of mechanical or chemical combined removal of phosphorus scale to ensure high productivity in the mass production of steel. In the production of stainless steel sheets and other alloy steel plates and strips, it is necessary to conduct shot blasting or pickling after annealing in the cold rolling process to ensure the surface roughness and thickness accuracy of cold rolled steel. The shot blasting machine is first used to remove sand and scale, such as casting and forging. The main purpose is to use the high-speed rotating impeller to throw the injected sand from the surface of high-speed collision parts to meet the surface treatment requirements.

1. Strictly operate the fixed post training equipment and be familiar with the performance and characteristics of the machine.

2. Be familiar with the operation procedures, use, maintenance and maintenance in the shot blasting machine operation manual.

3. The operator must first check whether each switch of the control cabinet (panel) is in the required setting position (including the power switch) to avoid the failure and damage of electrical and mechanical equipment, which may lead to equipment accidents.

4. Non-operators shall not operate or touch the electrical switch control area at will, and shall not be close to the working area of the machine to avoid accidents.

5. Operators must wear protective work clothes, glasses, etc.

6. When the operator starts, please pay special attention to various instrument indications on the panel. When all the instructions of the instrument reach the normal value, the small crane (roller) can be operated to enter the working procedure. If you find that a single instrument displays a large error (abnormal), please turn it off immediately. Before starting normal operation, please check whether the equipment has troubleshooting.

7. During the operation of the equipment, the operator must patrol the equipment to check the abnormal noise and overheating of each component. If the equipment has serious faults during operation, please press the "Emergency Stop" button to stop maintenance and cooperate with professional personnel to eliminate the equipment faults.

The above is what we have brought to you today. If you have any relevant questions, you can contact us at any time.