Today, the shot blasting machine manufacturer Wuxi IDEAL Machinery will introduce the shot blasting machine. There are several different grinding methods for the shot blasting machine. This time, the manufacturer of the shot blasting machine wants to give you a specific explanation so that you can have a deeper understanding of the shot blasting machine.

Shot blasting machine refers to the casting equipment that uses the high-speed shot thrown by the shot blaster to clean or strengthen the surface of the casting. The shot blasting machine can carry out sand blasting, core removal and cleaning for the casting together. Some areas are also called sanding machines and sandblasting machines verbally. The shot blasting machine is different from the shot blasting machine in that it is used to reduce the fatigue life of parts, increase different external stresses, increase the strength of parts, or avoid fretting.

1. Centrifugal grinding method

Generally, the reverse grinding machine makes the equipment and grinding stone rub during operation. If the relative motion of the equipment and grinding stone is poor, the grinding effect between them will be greatly weakened, but the centrifugal grinding method is different, because it is equipped with several grinding grooves on the disc of the reverse rotating head, so that the equipment can rotate, The equipment can be reversed around the grinding groove once, then at the outer circle of the groove arm once, and then at the outer plate once, which greatly improves the grinding force. This centrifugal grinding method is 60 times as much as that of the reverse grinding machine, and five to eight times as much as that of the vibration grinding machine. Therefore, the centrifugal grinding method of the shot blasting machine is generally used for the grinding of small objects.

II. Vortex grinding method

This kind of grinding method is mainly to install some abrasive, abrasive stone and water in the round grinding machine on the horizontal plane or the straight surface of the pen, so that the object can rub with the abrasive stone and then be ground.

Three, vibration grinding method

Casting, abrasive and grinding stone are installed in the grinding groove of the shot blasting machine for vibration. This grinding method enables the solvent in the grinding groove to be fully used, and its operation efficiency is also very high. It is also a widely used grinding method.

These are three common grinding methods of the shot blasting machine. Of course, besides these grinding methods, there are other grinding methods for the shot blasting machine. If you are interested, you can find them online.

This is the whole content of today. If you want to know more about the shot blasting machine, please pay attention to the shot blasting machine manufacturer Wuxi IDEAL Machinery.