Today, the shot blasting machine manufacturer Wuxi IDEAL Machinery will introduce the shot blasting machine. The horizontal shot blasting machine is a newly developed shot blasting machine. This kind of shot blasting machine is generally used during steel plate pretreatment. It is mainly composed of electric control system, workpiece conveying system and other structures. What are the effects of these working systems of the horizontal shot blasting machine?

The shot blasting machine was earlier used to remove sand and oxide scale in castings and castings. It is mainly to use the high-speed rotating impeller to throw the shot sand into the surface of the parts at high speed to meet the requirements of surface treatment. The shot sand speed is generally 50~100nds.

With the official introduction of the new international ballast tank coating specification, the requirements and standards for ship plate coating are clearly included in the classification conditions. There are higher requirements for the anti-corrosion function and service life of the ship plate coating to ensure the safety of the hull structure.

The shot blasting machine manufacturer stated that the shot blasting machine is divided into roller type, chain plate type, rotary table type, trolley type, squirrel-cage type and hanging type according to the structure of the bearing body of the casting.

1、 Workpiece conveying system

The workpiece conveying system of the horizontal shot blasting machine uses a stepless speed change device, which can work independently and synchronously. Moreover, their roller table materials are made of special materials, which are very wear-resistant and are also sheathed. At the same time, a workpiece detection device is installed outside the shot blasting room, so that the delay time required by the PLC setting after the casting can be detected, and the operation time is more accurate.

2、 Finishing steel sand

After the steel plate is exported, there will be a lot of steel sand. These steel sand must be sorted out and can be cleaned with high-strength nylon roller brush. For example, after cleaning, use the second line of defense fan of the shot blasting machine to blow them clean.

3、 Circulation system

The circulation system of horizontal shot blasting machine uses curtain air separator, high-power screw conveyor and bucket elevator, and the shot circulation system of the shot blasting machine also has very good fault warning function.

4、 Shot blasting dust removal system

The shot blasting and dust removal power of this system reaches 99%, and the pulse plus sedimentation multi-layer filter cartridge dust removal operation system is used. Their emission concentration is less than or equal to 100 mg per cubic meter, fully meeting our national safety standards.

The above is the effect of each working system of the horizontal shot blasting machine. In fact, this is also the whole composition of the horizontal shot blasting machine. It is the common effect of these systems that will make the machine work better.

The above is the relevant content introduced by Wuxi IDEAL Machinery Manufacturing Co., Ltd., the manufacturer of shot blasting machine.