The manufacturer of shot blasting machine will talk with you in detail about the machine grinding method of shot blasting equipment.

Centrifugal grinding method of shot blasting machine manufacturer:

1. When the general rotary grinder rotates at high speed, its material (mixture) will surround the grinding groove, and the workpiece and grinding

The grindstone has no relative movement, so there is no relative movement difference, and the grinding effect will be greatly weakened, while the centrifugal grinding method is applied to the rotary shaft of the rotary head disc

Several grinding grooves are installed at equal intervals to carry out planetary rotation movement and give centrifugal force. The material will be surrounded by the side of the outer circle of rotation of the groove wall due to centrifugal force. The outer circle of rotation will be grinded once, and the grinding groove will be reversed once, and the material will move in the direction of rotation in which the space in the grinding groove contacts with the upper part. Due to the pressure of centrifugal force and forced movement speed of the material, the free abrasive stone in the material moves with the workpiece

The movement produces relative motion difference, and the grinding effect is caused by the existence of dry relative motion difference. The rotation speed is 140~180r/min

The relative motion difference and centrifugal force in direct proportion to the number of revolutions will increase, and the grinding effect will exceed 60 times of the rotary grinder, which is oscillation

5~8 times of the grinder. The grinding ability of the centrifugal grinder is very outstanding, with great grinding force flashing. It is widely used in the polishing of wall clocks, electronics, electrical components and other precision MI machines, especially suitable for the grinding of small workpieces.

2. Water vortex flow lapping method of shot blasting machine: water vortex flow lapping method is to put grinding in the cylindrical grinding groove installed on the vertical or horizontal plane

Stone, water and abrasive, with the horizontal rotation of grinding, the grinding stone will form a fine and rigid grinding layer due to centrifugal force

When the workpiece is loaded in the layer, the grinding effect of GAO power formed by the relative motion difference with the grinding stone will be produced

HST550 road shot blasting machine

3. The rotary grinding method of shot blasting machine: the rotary grinding method is a processing method that the workpiece, grinding stone, abrasive and water are loaded in the grinding groove and given to the fixed rotary motion to make the material surface produce an active layer for polishing. This grinding method is more suitable for grinding small and medium-sized parts and various kinds of small batch workpieces.

4. Shot blasting and machine vibration grinding method: the vibration grinding method is to fill the workpiece, grinding stone, abrasive and water in the horizontal of the grinding room for dry vibration

The relative motion difference between the grinding stone and a piece caused by vibration is eliminated by the processing method of grinding

Clean space, play the solvent in the grinding tank. This kind of grinding method is widely used because it improves the work efficiency of the rotary grinder by 3~5 times, and the processed workpiece has no marks, deformation and other phenomena.

If you want to know more relevant knowledge, you can browse our website, and we will provide you with more professional information!