Introduction to IDEAL007 and sandblasting room:

The process of sandblasting room refers to the process of blasting the steel surface (in fact, the material state) and applying protective primer before processing. The floor in the sandblasting room adopts special honeycomb floor, and the size of each honeycomb floor is 500mm × 500 mm。 Each two rows of honeycomb floors form a honeycomb floor module along the length of the sandblasting room. After the abrasive falls into the honeycomb floor, the fan will suck it into the collection pipe through the material hole, and then suck it away from the collection pipe.

Classification of sandblasting room

According to the type of air distribution in the sandblasting room:

The airflow organization is generated by the ventilation in the sandblasting room, so that the spray flows in the flow direction of the airflow organization. Its flow direction is perpendicular to the rotation direction of the workpiece, which is called the transverse exhaust sandblasting room; Those parallel to the moving direction of the workpiece are called longitudinal exhaust sandblasting room; The air supply from the top of the sandblasting room and the air extraction from the bottom is called the upper supply and lower return sandblasting room.

Classification according to the sprayed coating:

There are primer sandblasting rooms and finish sandblasting rooms, or other sandblasting rooms with special requirements. Due to different coating functions, the process conditions of the sandblasting room are obviously different, and are also related to the selection of paint materials.

According to the structure of sandblasting room:

Because of the different ways of spray filtration, there are dry sandblasting rooms, that is, baffles or filters are used to capture and treat spray. Wet sandblasting room relies on water to treat spray. In addition, there is an open sandblasting room, that is, there is no fence structure around the workpiece.