Today, Wuxi IDEAL Machinery will introduce the shot blasting machine. In modern society, with the continuous development and improvement of industrial level, the demand for shot blasting machines in major mechanical enterprises is increasing. After knowing what shot blasting machines are, I believe you have a certain understanding of the use of shot blasting machines. However, after any machine has been used for a long time, various problems will occur, so the shot blasting machines also need to be inspected and repaired regularly. What are the items?

1. Check the wear of manganese steel protective plate and other protective plates in the cleaning room of the shot blasting machine. If severe wear or fracture is found, replace them immediately, so as to puncture the chamber wall with bullet-proof shot and fly out of the chamber to hurt people. When it is necessary to enter the interior of the room for repair, it is necessary to cut off the main power supply of the equipment and hang a sign for indication.

2. Check the tension of the hoist and tighten it in time.

3. Check the vibration of the shot blasting machine. In case of large vibration of the machine, immediately stop the machine operation, check the wear of the abrasion-proof parts of the shot blaster and the focus of the impeller, and replace the worn parts.

4. Smooth all motors and bearings on the equipment on time.

5. Punctuality makes up for new bullets. Because projectiles will be worn and broken during use, a certain number of new projectiles should be made up on time. Especially when the quality of the cleaned workpiece is not up to the standard, the small amount of pellets may be an important reason.

6. When installing the blades of the shot blasting machine, the weight difference of a group of eight blades should not be greater than 5 grams, and the wear of the blades, shot splitters and directional sleeves should be checked frequently for timely replacement.

The shot blasting machine can be divided into roller type, chain plate type, rotary table type, trolley type, squirrel-cage type and hanging type according to the structure of the bearing body of the casting. Their main characteristics are: the roller type and chain plate type shot blasting machine are suitable for clearing small and medium-sized castings that are not afraid of collision. The drum-type shot blasting machine relies on the spiral guide bar in the cylinder to make the casting turn over and work forward.

The hanging shot blasting machine can be equipped with several lifting hooks on the suspension chain according to the needs of the castings to be liquidated. During liquidation, the castings are hung on the lifting hooks and turn over automatically while working forward. The castings are loaded and unloaded outside the shot blasting room, and the liquidation is suspended indoors. According to the working system, it can be divided into intermittent and continuous shot blasting machines. Sand blasting room: it does not need deep pits (or do not make pits), and the infrastructure cost is low. The equipment of shot blasting and clearing machine with short construction period is mainly composed of shot blasting machine, grinded rubber belt, auger, lifting, separator, feed delivery, dust remover, and clearing machine.

The above is the relevant content introduced by Wuxi IDEAL Machinery Manufacturing Co., Ltd.