Today, Wuxi IDEAL Machinery will introduce the shot blasting machine. The quality of shot blasting machine accessories directly affects the service life of the whole machine. The hook type shot blasting machine is divided into single hook and double hook. The hook type shot blasting machine loads the workpiece into the shot blasting room alternately by two hooks. Use the shot blaster to throw 0.2~0.8 projectiles onto the surface of the workpiece to make the surface of the workpiece reach a certain roughness, make the workpiece beautiful, or change the compressive stress of the workpiece to improve the life.

This machine is widely used for surface finishing or strengthening treatment of medium and small castings and forgings in casting, construction, chemical, electrical machinery, machine tools and other industries. Shot blasting machine is different from shot blasting machine in that it is used to reduce the fatigue life of parts, increase different surface stresses, increase the strength of parts, or prevent fretting.

The main contents of the accessories company of the shot blasting machine include the wearing parts of the vulnerable products of various types of shot blasting machine equipment, such as the guard plate of the shot blasting machine, the end guard plate of the shot blasting machine, the top guard plate, the side guard plate, the impeller, the blade, the directional sleeve, the shot splitting wheel, the snap spring, the shot blasting machine assembly, the head cover, the belt pulley, the impeller planning spindle, etc. Shot blasting machine is different from shot blasting machine in that it is used to reduce the fatigue life of parts, increase different surface stresses, increase the strength of parts, or prevent fretting. Xiaobian has the following suggestions for you.

1、 Identification method:

1. Look at its appearance to see whether its product appearance processing is fine and whether its color is normal; If there is a pure part sample, it can be checked by comparison. Generally, the surface of the imitation is rough and the color of the product is incorrect.

2. You can check the logo of the product. The brand logo, part number and detailed code are printed on the genuine imported parts. Some products are also engraved with the country of origin.

3. The product can be compared by using special measuring tools.

4. Check whether the casting can meet the quenching requirements, whether there are cracks, whether the blades are rolled, whether the rolling is smooth, and whether the angle analysis of the forward sleeve needs to meet the requirements of the planning.

Secondly, routine maintenance of shot blasting machine accessories

1. Before operation, check the screws of shot blasting machine accessories and whether they need to be tightened.

2. Check whether there are sundries falling into the machine and remove them in time to prevent the equipment failure from blocking all the transportation links.

3. Before each shift, check the wearing parts such as plates, blades, impellers, rubber screens, directional sleeves and rollers, and replace them in time.

4. Check whether the corresponding cooperative electric moving components are loose and tightened.

5. The oiling point of the shot blasting machine shall be punctual and organize to check whether the oiling of each part can meet the national regulations. When the shot blasting machine works, we only need to do a good job in the maintenance and management of the shot blasting machine accessories, and we will get useful time to extend the service life of the equipment and reduce the occurrence of system failures.

If you want to know more and can read our website, we will provide you with better information!