Through shot blasting machine_ Shot blasting machine manufacturer_ Wuxi shot blasting machine-Wuxi IDEAL Machinery Manufacturing Co., Ltd

Through shot blasting machine_ Shot blasting machine manufacturer_ Wuxi shot blasting machine-Wuxi IDEAL Machinery Manufacturing Co., Ltd

current position: Home > Product Center > Steel pretreatment line
IDEAL010、Steel pretreatment line

IDEAL010、Steel pretreatment line

  • Category:Steel pretreatment line
  • Browse number:
  • QR code:
  • Release time:2022-05-27 14:26:50
  • Product description

IDEAL010, introduction of steel pretreatment line:

The steel pretreatment line is mainly composed of roller conveyor system, shot blasting cleaning machine, automatic paint spraying room, drying room, shot blasting dust removal system, paint mist filtering system and electric control system. The working principle of the steel pretreatment line is: the steel is sent to the roller conveyor system, and then to the shot blasting cleaning room through the roller conveyor system. The steel wire cutting shot (shot) is accelerated to the surface of the workpiece by using the high-speed rotating impeller of the shot blasting machine to impact the surface of the workpiece, scrape to remove the rust and dirt on the surface of the workpiece, and then the floating dust of the shot on the surface of the workpiece is cleaned by using the roller brush, the shot collecting screw and the high-pressure blowing pipe, The derusted steel enters the paint booth through the middle roller, and the maintenance primer is sprayed on the surface of the workpiece through the high-pressure airless spray gun installed on the upper and lower paint trolleys. The paint film on the steel surface is quickly sent out in the dry state through the drying room, so that the steel can achieve the purpose of rust removal and rust prevention.

In the production process, if there are special circumstances that need to be changed from automatic to manual, the "automatic/manual" transfer switch can be turned from the "automatic" position plate to the "manual" position. At this time, the electrical equipment is in the original working state, and the operator can press the start/stop button to control the relevant motor and solenoid valve.


IDEAL010、钢材预处理线

Recently Viewed:

Online evaluation (0)

    No evaluation information!