Introduction to IDEAL003 and steel pipe shot blasting machine:

The steel pipe shot blasting machine is used to transport liquid, gas and buildings. The steel pipe is made of many different thicknesses. If the very thick steel pipe can be used for cleaning, a small shot blasting machine can be used, but the thin steel pipe can not be used. The thinner steel pipe is, the harder it is to clean. Because the steel pipe is long, it cannot be cleaned by traditional methods.

The sandblasting equipment for the inner wall of the steel pipe shot blasting machine needs to be equipped with this model. First, adjust the support of the sandblasting machine to match the inner diameter of the steel pipe, and easily slide in the steel pipe. Then connect the sand pipe from the air source and the sandblasting machine with the sandblasting machine in the steel pipe, and then open the air source and the high-efficiency sandblasting machine. The compressed air abrasive flow in the sandblasting machine enters the inner wall sandblasting machine, and the filtered air from the two nozzles (the sandblasting machine is composed of two nozzles) is connected to the motor, so that the nozzle rotates, and the surrounding of the steel pipe can be cleaned. At the same time, the sandblasting machine is pulled out at a constant speed, and the entire inner wall of the steel pipe can be cleaned. The steel pipe inner wall sandblasting machine is a fast and efficient equipment for cleaning the steel pipe inner wall. It is the preferred equipment for cleaning the steel pipe inner wall.